|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
NEW 2mm Hard Metric Coaxial Connector PO21M, PO51M, PO82M Series (IEC 61076-4-101 Compliant) Photo 1 sSummary P021M, PO51M, and P082M connector series are a plug-in type coaxial contact and an applicable housing case compliant with the 2mm hard metric standard (IEC 61076-4-101). PO21M series: PO51M series: PO82M series: Housing 50o coaxial contact 75o coaxial contact Mounted on the same board as the 2mm hard metric connector sFeatures 1. Profile complies with 2mm hard metric This connector can be mounted on the same board as the hard metric connector. (Refer to Photos 1 and 2.) It uses Compact-PCI designated key options to identify a 3.3V or 5V system. (Hirose's MU optical fiber series can also be mounted on the same board as the 2mm electric system connector. Refer to Photo 1) Photo 2 q50 o type (PO51M series) 2. Flexible Design allows for various terminations The housing (P021M series) allows for both cable mount as well as board mounted connectors. The back plane side allows both a 50o and a 75o straight jack as well as a right angle 50o jack. The daughter card side allows both a 50o and a 75o straight plug as well as a right angle 50o board mounted jack. 3. 50o type and 75o type Hirose's unique technology assures that the high frequency characteristics of the 50o impedance type (P051M) and 75o impedance type (P082M) are consistent between the fully mated position and a mated position with a 1mm gap. Note: The P082M connector opening is designed in the HRS original form in order to enhance high frequency characteristics. q75 o type (PO82M series) sApplications q Base Station q Digital and Analog Switch Equipment q Digital Broadcasting Equipment q Test & Measurement Equipment q Factory Control & Automation Equipment 2001.6 1 sSpecification Item Characteristic Impedance Voltage Standing Wave Ratio Insulation Resistance Withstand Voltage Contact Resistance PO51M Standard/Condition 50o 0~3GHz V.S.W.R.1.2 max. 1000Mo/500V DC 750V AC for one minute Inner : 6mo max. * Outer : 3mo max. 75o 0~2GHz V.S.W.R.1.2 max. 1000Mo/500V DC 750V AC for one minute Inner : 11mo max. * Outer : 3mo max. PO82M Standard/Condition sMaterials Part Housing Outer Conductor Inner Conductor Insulator Material PBT Brass, phosphor bronze Phosphor bronze, beryllium bronze PTFE Finish ---- Gold plating Gold plating ---- sProduct Configuration Cable to the Backplane Daughter Card Side Housing Backplane : PO21M series (PO21M-*S-*) (PO21M-*P-*) Plug (PO51M-P-*) Impedance 50o type coaxial connector PO51M series Jack (PO51M-J-*) Right Angle Cable Jack (PO51M-LJ-*) Right Angle PCB plug receptacle (PO51M-LPR-*) Impedance 75o type coaxial connector PO82M series (Hirose original) Jack (PO82M-J-*) Plug(PO82M-P-*) 2 Housing - PO21M series sDaughter Card Side: Coaxial 6-contact housing (IEC 61076-4-101 Compliant) 12.25 11.4 3.7 12.8 6 BRecommended PCB Layout (Component Side) 7.5 7.5 6.25 6.25 7.5 7.5 2.5 2.5 2.5 2 Note 1 The board hole pitch tolerance should be 0.05mm. 2 The 30-O1.3 hole is needed to combine and use coaxial connector PO51M-LPR-PC-1A. 3.5 6 Product No. PO21M-6P-SA HRS No. CL330-0305-4 2.5 Remark Compliant to IEC = Style L 3.7 7.3 PBT 49.95 7.5 7.5 6.25 6.25 7.5 7.5 3.2 20.7 24 30 -O 1.3 ugh o thr .1 +0 0 20 lot ed 2 16 10 6 2 (N (P O 82 .05 +0 0 ot Pl ote dt hr ou gh ) ) 3 sDaughter Card Side: Coaxial 6-contact housing (Nut Insert for Board Mounting) 12.25 11.4 A 3.7 12.8 AA 3.7 7.3 M2 M2 2.1 BRecommended PCB Layout (Component Side) 7.5 7.5 6.25 6.25 7.5 7.5 2.5 2 2.5 2.5 Note 1 The board hole pitch tolerance should be 0.05mm. 2 The 30-O1.3 hole is needed to combine and use coaxial connector PO51M-LPR-PC-1A. 3.5 6 (N 6- ot O2 Pl ot ed +0 0 .05 th ro ug h) Product No. PO21M-6P-SA-S HRS No. CL330-0306-7 2.5 Remark Nut insert product for mounting board 4 5.1 30 PBT 49.95 A 7.5 7.5 6.25 6.25 7.5 7.5 3.2 20.7 24 20 16 10 6 2 (P lot ed 0 ) gh .2 ou O2 thr 2ted Plo ot (N .3 O1 .1 +0 0 thr +0 ou gh ) .1 2 sBackplane Cable Side: Coaxial 6-contact housing 49.95 0.55 7.5 7.5 6.25 6.25 7.5 7.5 0.4 10 16 20 24 PBT B 3.75 3.75 3.75 3.75 A B 3.5 32 2 6 15.4 3 A AA 5.5 4 13.45 AA (PO21M-6S-PA-S) (PO21M-6S-PA) 4.5 O5.1 2 M2.5 BRecommended PCB Layout (Component Side) 5 .0 +0 0 h) ug 7.5 5.5 4.5 7.5 6.25 6.25 7.5 7.5 2 hro -O ed t .1 11 t plat +0 0 ugh) o .1 thro (N O6 ted 6- t pla o (N Note 1 The board hole pitch tolerance should be 0.05mm. 2 The 4-O2.6 hole is needed to use and fix this product on the board by screws. 5 43.75 3.75 3.75 3.75 (N ot O2 .6 +0 pla 0 .1 te d th ro 2 ug Product No. PO21M-6S-PA PO21M-6S-PA-S HRS No. CL330-0300-0 CL330-0301-3 2 Connector center line h) Remark Compliant to IEC = Style L Nut insert product for mounting board * * The above pattern shows a layout for PO21M-6S-PA. PO21M-6-PA-S needs 2 screws (M2.5) to be inserted in area #2 as shown above. 5 sCoding Key These IEC 61076-4-101 compliant keys distinguish between daughter cards with 3.3V or 5V as specified by Compact-PCI. These keys are installed into the PO21M-6S and PO21M-6P type housings to prevent mis-mating. q Product Corresponding to Compact PCI 3.3V (Yellow) Product No. PCN-21-P-CK (A) PCN-21-S-CK (A) HRS No. CL643-0039-3 CL643-0037-8 Type 3456 1278 Applicable Connector PO21M-6S type housing PO21M-6P type housing qProduct Corresponding to Compact PCI 5V (Blue) Product No. PCN-21-P-CK (B) PCN-21-S-CK (B) HRS No. CL643-0040-2 CL643-0038-0 Type 1567 2348 Applicable Connector PO21M-6S type housing PO21M-6P type housing 6 50o Impedance Coaxial Connector - PO51M Series sInline Cable Plug Product No. PO51M-P-1.5W PO51M-P-1.5W HRS No. CL330-0320-8 CL330-0321-0 Applicable Cable 1.5D-HQEW, Each kind of 1.5D-2W type cable 1.5D-HQEV, Each kind of 1.5D-2V type cable 11.5 18.9 sRight Angle PCB Receptacle Product No. PO51M-LPR-PC-1A HRS No. CL330-0315-8 11.5 5.7 3.2 10 BRecommended PCB Layout (Component Side) O 50.05 2.50.05 3 1. .1 +0 0 2.50.05 50.05 sInline Cable Jack 18.9 Product No. PO51M-J-1.5W PO51M-J-1.5W HRS No. CL330-0330-1 CL330-0331-4 Applicable Cable 1.5D-HQEW, Each kind of 1.5D-2W type cable 1.5D-HQEV, Each kind of 1.5D-2V type cable O5.7 11.7 sRight Angle Cable Jack Product No. PO51M-LJ-1.5W PO51M-LJ-1.5 PO51M-LJ-178-1 HRS No. CL330-0340-5 CL330-0341-8 CL330-0343-3 Applicable Cable 1.5D-HQEW, Each kind of 1.5D-2W type cable 13.9 7.55 22.1 11.7 1.5D-HQEV, Each kind of 1.5D-2V type cable RG-178B/U M 5.7 PO51M-LJ-1.5W PO51M-LJ-1.5 22.1 7.55 11.7 14.2 M 5.7 PO51M-LJ-178-1 5.7 4-M 0.6 O5.7 7 75o Impedance Coaxial Connector - PO82M Series sInline Cable Plug 18.9 Product No. PO82M-P-1.5C HRS No. CL330-0350-9 Applicable Cable 1.5C-QEV, Each kind of 1.5C-2V type cable 11.5 sInline Cable Jack 18.9 Product No. PO82M-J-1.5C HRS No. CL330-0351-1 Applicable Cable 1.5C-QEV, Each kind of 1.5C-2V type cable O5.7 11.7 s Extraction Jig Product No. PO51M, PO82M Plug Jig PO51M, PJ82M Jack Jig (Common to PO51, PO72 Jack Jig) PO51MP-T-1 PO51J-T-1 HRS No. CL350-0137-6 CL350-0038-4 8 O5.7 BMating Condition The mating condition is shown as follows. q Lateral and Longitudinal Mating q Slant Mating 2 2 2 2 9 BUsage q Example of 50o Impedance Type (PO51M) in Combination SMB economic product One touch full rock N.UM (P) series PO51M series POD1 series 8.6 q Example of 75o Impedance Type (PO82M) in Combination 75o high precise aligned PL71 series PO82M series BNC(75) series 7.65 q Example of Custom Development (Mid plane Application) 10 O13 O7.6 11 12 |
Price & Availability of PO21M-6P-SA |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |